If you know the product, go straight to its details and request a quote. If you need help choosing, tell us what you are treating and what you want to improve. Each of the four quenchant families has its own features; you do not need to learn an analysis workflow first.
Addresses insufficient through-hardening with air cooling, uneven hardness in heavy sections and cracking when cooling is intensified. Temperature-range-specific cooling and workpiece validation help balance service performance and create scope to optimize nickel, molybdenum and other alloy additions.
Match the quenchant, loading arrangement and relative motion to heavy-section liners that need wear resistance, impact resistance and resistance to fracture in service. Assess results from surface to core rather than maximizing surface hardness alone.
For workpieces requiring intensified cooling. Compare ANRAN test curves, then discuss the required temperature intervals, operating conditions and crack-control approach.
For routine quenching and batch production, including general water-based quenchant selection and replacement of oil quenching where the application permits.
Ready to purchase: Send the model and quantity for a quotation.
Replacing your fluid: Tell us about the current medium and part so we can discuss suitability and trial conditions.
Investigating a problem: Describe insufficient hardness, cracking, distortion or uneven hardness. A complete report is not required to start.
A cooling-curve analyzer compares fresh and in-service fluid. Internal temperature measurement checks cooling inside heavy parts. Dedicated fixtures and quenching equipment address immersion, shielding, placement and relative motion.
Testing and equipment are optional additions, not conditions for purchasing quenchant. Drawings, curves and composition may be provided voluntarily after initial contact.
The footage shows lifting, transfer, immersion and bath response. It helps frame equipment and process questions, but it does not replace material, concentration, temperature, relative motion or inspection data.
Watch the lifting attitude, transfer route, available tank space and response after immersion. Quenchant selection still depends on material, section and installed capacity.
Production footage records one workpiece, fixture and tank condition. Microstructure, hardness, distortion and cracking must be confirmed with data from the same production context.
Every product can be quoted and purchased separately. Choose complementary products only when needed.
Data classification
Every curve and conclusion on this site is identified by how the data was obtained.
Describes the medium response for the stated probe and test conditions. It is not the surface or core curve of a production workpiece.
Calculated from a stated model and inputs. It is a prediction, not measured production data.
Comes from internal points in the actual workpiece and is used to assess the real cooling process against post-quench hardness, microstructure and properties.